TIP: Put some never seize on the flare nut threads. If the nuts turn free, spray them again. This will cause the caliper to hang up or not operate correctly. This will give the penetrating oil time to work itself down into the nut. But they do get fine silt in there. Measure out a length of brake line to match your old line, then cut it. Have your friend pump the brakes a few times to force the air out of the brake line. Spray the fittings as often as you can.
Can anyone recommend top shelf upgraded brake lines and where to get them?
I'm having problems finding lines for 4x4 crew cab. › › 2nd Gen: - › Exterior. i have a ram 4x4 My right rear wheel locks only on hard braking Now I bought this used and someone has replaced all steel brake.
Set your drain pan underneath the brake caliper and loosen the bleeder screw.
Video: Dodge ram forum brake lines How to Bleed your Brakes by Yourself
If you must reuse the washers, flip them over. Don't try to loosen it with the open end. It'll require a few special tools and plenty of patience.
Sometimes it may prevent a true user from registering.
Dodge Ram Stainless Steel Braided Brake Lines – KLM Performance
For this tutorial we'll be focusing on the rear brake lines, but these instructions can be applied to any section of hard brake lines.
TIP: Put some never seize on the flare nut threads. Water, road salt, dirt ect.
Video: Dodge ram forum brake lines Dodge Van Brake Line Problem and Solution 2000-2003 models
Sometimes it may prevent a true user from registering. Turn them slowly and watch the line to see if the nut is turning freely or it is twisting the lines.
Heat only the block and the flare nut in short intervals.